Forums Forums Classic Carburettor Forum DMTL idle jet

This topic contains 3 replies, has 2 voices, and was last updated by  ClassicCarbs 8 months, 2 weeks ago.

  • Author
    Posts
  • #405 Reply

    Yoichiro Kosuge

    Hello,

    I am looking for idle jet, holder and Emulsion tube for DMTL.
    Please tell me which parts should be used.

    Then I can’t view the Japanese page. Is there a server problem?

    Best Regards,
    Y.Kosuge

  • #406 Reply

    ClassicCarbs
    Keymaster

    Hello Y. Kosuge,

    Thank you for your email message.
    Our online shop is built in the English language, and although we have tried to translate to Japanese, the software does not perform as well as in the English language.

    For best experience, if possible, please use the english language, especially for checkout/cart.

    Thank you for this valuable feedback however, we will endeavour to improve this.

    Idle jet will be 74403:

    WEBER DGV/DFAV/DGAS/DGMS/DRT/DGAV/IDA3C/DMTR/DMTL CARB IDLE JETS

    Idle jet holders 52570.004:

    WEBER IDF 36 & DMTL CARBURETTOR IDLE JET HOLDER (FOR ITALIAN IDF 36)

    Emulsion tubes will be 61450 type, but only the slim versions:

    WEBER DCOE/DCOM/DCO/SP/IDF/IDA 2-BARREL TWIN CARBS EMULSION TUBE

    Thank you,

    Emmanuel

  • #446 Reply

    Yoichiro Kosuge

    Dear Emmanuel,

    Thank you for your advice!
    I ordered without an emulsion tube.
    Does the slim type emulsion tube mean F7, F8?

    I currently use F30.
    Do you understand the characteristics of this?

    Best Regards,
    Yoichiro Kosuge

  • #451 Reply

    ClassicCarbs
    Keymaster

    Hello Yoichiro Kosuge,

    I have emailed you just now, with a little information sheets for emulsion tubes.
    The F30 is not a current emulsion tube, and we have no information on it’s characteristics.

    Please check your email inbox.

    Thank you,

    Emmanuel

Reply To: DMTL idle jet
Your information: