August 31, 2019 at 2:21 pm #235
I have twin Dellorto 45 going onto a manifold and I have a vacuum leak on 2 carbs.
Ive pulled the old gaskets off they appear to be plastic with 2 O rings
I have seen 2 metal mounting spacers for 45s one at £12.59 and one at £7.59 which is correct ?
Or would I be better with Misab mounts ?
Also do you have a set of the rubber anti shock washers which I would use when bolting the carbs on
I have attached a picture which may help
August 31, 2019 at 3:28 pm #236
Ive checked and the thin misab ring won’t work as the carbs need to clear another part of the engine and I need the additional 6mm clearance.
The one at £12.59 looks the same as the one at £7.59 other than it has a half moon cut out on one edge ??
Do I need a paper gasket too ? If so on which side ? Or is the mounting plate sufficient on its own for the seal ? Thanks !
September 3, 2019 at 12:59 pm #245
We discussed this directly, and your parts are on the way to you today.